Bathroom extractor fan cleaning tips
A bathroom extractor fan is an essential piece of equipment in your bathroom. It helps remove moisture from the air and keeps your bathroom smelling fresh. But if it gets dirty or clogged up, it could be making your bathroom smell bad. It can help keep the moisture levels in your house as low as possible, improve air quality and humidity levels, fight off pests and insects, reduce airborne bacteria and particles, blow away dust and odors, expel stale or contaminated air to the outside of your home and remove nasty germs from under the doors of your doors. That's a lot of potential benefits that might not be as obvious at first glance.
We’ll show you how to clean your bathroom extractors fan so it works perfectly again. A bathroom extractor fan is an essential piece of equipment in any bathroom. However, if it gets dirty or clogged up, it can cause serious problems. Learn how to clean your bathroom extractors!
Our goal is always to make sure everything looks great before you move in—and there's no better way than having us do it.
Here are the steps:
- You need to make sure that the power is off first, and then unplug it from its electrical outlet. You should also make sure that the fan is not plugged into anything else—just in case it’s plugged into another appliance.
- Take off all of the coverings from the ventilation pipe and the blades.
- Remove the cover of your bathroom extractor fan.
- Remove the screws holding the blades in place with a screwdriver.
- If you see any clogs in the drain, try using a plunger to clear them out. If that doesn't work, call a plumber.
- Pull off both sides of each cover and set them aside for later
Now that everything is removed from inside your extractor fan, you can see all parts laid out on a clean dry surface, which should include all screws, nuts, washers, and so forth that came.
The process of cleaning an extractor fan involves removing any debris with a brush or vacuum cleaner and then wiping down the blades with a cloth or paper towel. Any parts are cleaned with warm soapy water. For any parts that have been cleaned with warm soapy water, you can also use an aerosol cleaner on certain models if they have been covered in an oily residue. This will help to remove any dirt that has become trapped inside. Clean all metal surfaces with a damp cloth or sponge that can be used on all surfaces of your bathroom extractor fan. Use a brush to remove any stubborn material from between the blades and housing of the extractor fan. Motor and clear debris away from it with the cotton buds.
For your extractor fan to function properly, the outer housing must be kept clean. The exterior of your unit should always be cleaned once a week using a soft brush or cloth. You can also use a vacuum cleaner or compressed air duster to remove any dust from inside the unit as well as from its exterior casing.
Once you have cleaned your bathroom extractor fan, you should make sure that it is dry before putting it back in place. You can do this by using some newspaper, which will prevent any dampness from getting into the motor and causing damage to it.
Of course, even after reading this step-by-step guide, you might still think it's too difficult to clean your bathroom exhaust fan. Give us a call to learn more about how we can help with your cleaning needs. Do yourself a favor and contact us right away if you'd like a free estimate on cleaning your home and including regular cleaning of your extractor fan in the process.
