How do soft Washing like a pro – Step-by-Step Analysis
Soft washing is an incredibly effective way to clean and protect your home, deck, driveway, or patio. It utilizes specialized low-pressure tools and detergent that won’t damage the surface being cleaned. This step-by-step guide will show you how to soft wash like a professional, giving you streak-free results and protection for years to come.
Prepare the area for soft washing
The first step in soft washing is always preparation of the area. This includes removing any furniture that may be on or around the surface, as well as taking care of any other items in the way. Make sure to clear off any loose dirt and debris on the surface before you begin soft washing. By properly preparing your area, you will get better results and avoid any unnecessary damage or accidents.
Choose and set up the right cleaning chemicals
When soft washing, it’s important to choose and set up the right cleaning chemicals. The most common types of soft wash products are sodium hydroxide, which is a strong alkaline detergent that kills green algae, and potassium hypochlorite, which is an effective chlorine-based disinfectant. It’s important to pick the right product for your situation because different surfaces require different types of products. Make sure you are properly setting up the chemical mixture so you can get the best results possible.
Select and use pressure washers appropriately
Pressure washers are a crucial part of the soft washing process. It’s important to select and use the right pressure washer with the correct psi levels. For high-pressure washing service use high psi and for soft washing low psi, for any kind of residential, commercial pressure cleaning, or strata pressure cleaning. Make sure the tool is suitable for your particular job since you don’t want to damage any of the surfaces you are cleaning. Start with a low-pressure rinse before you begin soft washing in order to ensure that all dirt and debris are removed from the surface. Then, adjust the pressure as needed for your particular job. Allow the cleaning solution to sit on the surface for the recommended time, usually 5 to 15 minutes, to let the biocide work. This process is also most helpful for construction property washing.
Apply the cleaning mixture carefully
Applying the cleaning mixture is a crucial step in the soft washing process. Be sure to select a biodegradable and eco-friendly product that meets your particular needs. Spread the mixture evenly and give it plenty of time to take effect, as indicated on the label. After it has had enough time to work, you can rinse off the solution and watch as grime, dirt, and other residues disappear. Cover nearby plants, flowers, and shrubs to protect them from the cleaning solution.
Rinse, check, and repeat as necessary to achieve desired results
After applying the soft wash mixture, it’s important to rinse it off thoroughly with clean water. You should assess the results and see if further treatments are required for stubborn stains. If needed, you can add more of the cleaning solution and apply pressure with a brush or scrubbing pad to achieve desired results. Lastly, rinse off the entire surface once more to get rid of all remaining residue.
The key thing here is to use very little water and don't rub too hard with the sponge. Also, make sure that you pay close attention to the exterior house as it can get covered in dried dirt which will ruin your cleaning. After finishing your soft washing then you can see a difference.
