Best way to clean commercial grout
Commercial grout is a large investment for any business to make. It's no surprise that keeping your commercial grout clean is a big job. You may have noticed just how dirty it can get. Commercial surfaces like tiles and stone are used in many places including restaurants, offices, schools, and even homes. They can get very dirty over time, which can be a serious recipe for disaster if left unchecked. Unfortunately, commercial cleaning grout left out in the sun will grow mold and mildew as can be seen in these pictures. If your grout has grown mold or mildew then it is best to get professional help to remove it from the building. There are a lot of products out there for commercial cleaning but these aren't always the best way to go about it. The purpose of this article is to help you find an effective method for getting your commercial tile and grout cleaning with minimal work by showing off some of my methods for getting things done fast. It works well on a variety of surfaces including ceramic, porcelain, marble, terrazzo, granite, and other types of tile floors.
There are various ways that you can clean your commercial grout but one of the best ways would be by using a special cleaner designed for this purpose.
Commercial grout cleaners are designed to clean and sanitize all types of commercial grout. Commercial Grout Cleaner is the most effective solution for maintaining your tile floors.
Vacuum regularly
Vacuum regularly to keep the grout clean and fresh. If you have pets or kids, it's a good idea to wipe down the grout with a damp cloth after they've been playing with it.
Use a damp sponge
You should also use a damp sponge or cloth to wipe off any dirt that may be on the surface of the tiles or stone tiles. You can also use a damp mop pad that has been soaked in water mixed with vinegar or another cleaning solution if necessary. Clean spills immediately with a damp cloth or sponge and neutral detergent; do not use scouring powder as it can damage surfaces over time if left on too long (if you think this might be an issue for you, consider renting an industrial steam cleaner instead).
Bleach
Once you've cleaned the grout thoroughly with one of these methods, use a spray bottle filled with water and add 1 teaspoon of bleach per gallon of water that you've used while cleaning. Fill up your spray bottle with this solution and then apply liberally over all surfaces of your grout until they're completely soaked through (this may take several applications). Don't forget about the edges - especially where there are corners where dirt is.
Use paper towels
Wipe down any spills immediately with water or mild soap then dry thoroughly with paper towels before wiping again with a damp cloth or sponge to remove excess moisture from the surface of your floor tiles; avoid using ammonia-based cleaners as they can cause stains on the surface of your grout lines if left on for too long.
Use right cleaner
You should make sure you're using the right cleaner. Commercial cleaners are designed specifically for commercial applications, so they're designed to be less harsh than regular household cleaners. Use an enzyme cleaner on hard surfaces. If you use something harsh on your grout, it'll damage both the surface of the grout itself and the floor underneath it. Next, make sure that you're using enough product on each section of grout at once! You don't want to use too much at once because then it won't have time to absorb all of the cracks in between pieces of tile or stone.
Use rubbing alcohol
To remove tough stains from granite countertops and marble floors, use rubbing alcohol instead of water for better results in removing dirt from these surfaces without damaging them further than normal household cleaners can do it naturally over time without causing damage to them when used too often on these types of surfaces without proper precautions being taken beforehand so as not to cause irreparable damage.
Castile soap
If stains are still visible after cleaning, try adding an ounce or two of castile soap to your cleaning solution for extra scrubbing power (and for better results!).
Baking soda
If you have stubborn stains on your tile, try using baking soda mixed with warm water instead of plain baking soda—it should do the trick!
Old toothpaste
Not all toothpaste is good for cleaning the grout, but a few tablespoons of old toothpaste mixed with 1/4 cup of warm water can be used to remove stains and dirt that may have seeped into the grout from your floors over time.
Lemon
To freshen up your grout, mix one tablespoon of lemon juice with two tablespoons of warm water until you get a paste-like consistency. Apply this mixture to a cloth or sponge and scrub vigorously for about 30 seconds on each area of grout where there is visible dirt buildup (this should be done every 3 months).
If you're not comfortable cleaning your grout yourself, contact a local professional cleaner like Oz cleaner who can come out and do a deep clean of your floors and walls for a reasonable price! If you want to make your grout shine and look at your office clean, hire professional cleaners who specialize in removing odors and stains from commercial spaces.
